Hasselblad 500 Classic handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 28 van 42
Attaching the Hasselblad Flash Adapters
SCA 390 and SCA 590
Forhand-heldashunits,eitheradapterisattachedas
shownintheillustrationabove:
• the 6-pole contact from the spiral cord is con-
nected to the camera’s side socket
• the sync cord is connected from the adapter to
thePCashterminalofthelens
• the connecting cord is attached to the handheld
unit.
NOTE:
The ash unit must always be set to the
“TTL” position.
Setting the Film Speed
ThelmspeedissetviatheISOselector.Thisisdivid-
ed into ISO/ASA settings from 16 - 1000. The equiva-
lent in DIN ratings can be found using the table below.
Certain lms require compensation for dierencesin
reection. In these instances, the compensation is
madebychangingthelmspeedselectorsetting.The
amount of compensation has to be determined by ex-
periment.
503CX and CXi only

Bekijk gratis de handleiding van Hasselblad 500 Classic, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHasselblad
Model500 Classic
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10097 MB