Hasselblad 500 Classic handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 29 van 42
ViewnderSignal
This indicator located under the left edge of the focus-
ingscreendisplaystwodierentsignals,bothshown
in a red glowing light. The indicator is only in operation
whenthecameraisusedwithashadaptersSCA390
or 590 and a ash unit that conforms to the corre-
sponding System SCA 300 or 500.
Ready Signal
A steady red light indicates that the ash unit is
chargedandreadytobered.
Result Signal
Ablinkingredlightthatoccursforjustoverasecond
afterexposureindicatesthattheashhasemittedthe
right amount of light for a correct exposure. After the
blinking signal, the indicator returns to the ready signal
whentheashunitisonceagainfullyrecharged.
No Result Signal
This indicates that the ash emitted was not su-
cient for correct exposure. The aperture must then be
openedortheashdistancetothesubjectmustbe
reduced.Changingtoafasterlmisalsoapossibility.
The Ready Signal will appear after a short but vari-
able length of time depending on the condition of the
batteries.
Pleaserefertoyourashunit’soperatinginstructions
for more information about other functions when using
automatic ash light metering thatconforms toSys-
temSCAashphotographywithashsensors,orwith
non-automaticashunits.
503CX and CXi only

Bekijk gratis de handleiding van Hasselblad 500 Classic, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHasselblad
Model500 Classic
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10097 MB