Harman Kardon HKTS 10 handleiding
Handleiding
Je bekijkt pagina 6 van 16
SUB-TS10 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS
¡ Speaker-Level Inputs: Connect these
binding post terminals to the main left and
right speaker terminals of your receiver or
amplifier, if your receiver or amplifier does
not have a line-level subwoofer output.
Remember to maintain polarity by connecting
the (+) terminal on the receiver/amplifier to
the (+) terminal on the SUB-TS10 subwoofer,
and the (–) terminal on the receiver/amplifier to
the (–) terminal on the SUB-TS10 subwoofer.
™ Speaker-Level Outputs: If you are
using the Speaker-Level Inputs ¡ on
the SUB-TS10, you should connect these
binding post terminals to your front left and
right speakers, remembering to maintain
polarity by connecting the (+) terminal on
the SUB-TS10 subwoofer to the (+) termi-
nal on the speaker, and the (–) terminal on
the SUB-TS10 subwoofer to the (–) terminal
on the speaker. If you are not using the
Speaker-Level Inputs ¡, then connect
your front left and right speakers directly to
your receiver or amplifier. See pages 11 and
12 for further information.
£ Line-Level Subwoofer (SUB) Input:
Connect the subwoofer output of a receiver
with digital surround sound decoding, such
as Dolby* Digital or DTS
®
, to this input. This
input bypasses the SUB-TS10’s internal
crossover circuitry, and should only be used
with a filtered signal. If your receiver does
not have digital decoding, you should use the
Line-Level Full-Range Inputs ¢ instead.
¢ Line-Level Full-Range Inputs: Con-
nect the line-level subwoofer output or
preamp output(s) of your receiver or amplifier
to these inputs. If your receiver does not have
a separate subwoofer output, use a Y-adaptor
(not supplied) to bridge the receiver’s preamp
output to the main amp input for that chan-
nel, and connect the long end of the adaptor
to the corresponding line-level input on the
SUB-TS10. If your receiver has only a single
subwoofer output, you may connect it to
either the left or right line-level input on the
SUB-TS10, and no Y-adaptor is needed.
∞ Phase Switch: This switch determines
whether the SUB-TS10 subwoofer’s piston-
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
harman/kardon
SUB-TS10
For use with
HKTS 10 System
OFF
NORMAL
REVERSE
OOFER LEVEL
ON
AUTO
IMPORTANT: CONNECT STRIPED WIRE TO RED ( ) SPEAKER TERMINAL.
AC 120V~60Hz
POWER
Made in China
⁄
¤
‚
¡
™
¢∞
¶ ª
§ •£
L
R
SUB
PHASE
FILTER
CONTROL
SUBW
GREEN: ON
RED: STAND-BY
FILTER
REMOTE
LINE
LEVEL
IN
ON
LR
¡ Speaker-Level Inputs
™ Speaker-Level Outputs
£ Line-Level Subwoofer (SUB) Input
¢ Line-Level Full-Range Inputs
∞ Phase Switch
§ High-Cut (Low-Pass) Filter Switch
¶ Music-Sense On/Off Switch
• Filter Remote Control Input
ª LED Indicator
‚ Subwoofer-Level Control
⁄ Master Power Switch
¤ AC Power Cord
5
Bekijk gratis de handleiding van Harman Kardon HKTS 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Harman Kardon |
| Model | HKTS 10 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1767 MB |
