Hanwha XNV-6123R handleiding
Handleiding
Je bekijkt pagina 29 van 39
English _29
! INSTALLATION & CONNECTION
To connect the alarm out
If devices (e.g., flashing light and siren) that exceed the voltage and current specifications are connected by
using the open collector method, it may cause malfunction.
Refer to the alarm out connection diagram below when connecting devices that exceed the voltage and
current specifications.
Alarm Out Wiring Diagram(example)
When the warning light/siren exceeds DC 12V/50mA (Connect Relay specifications in accordance with the
warning light/siren power specifications.)
Warning lamp /
Siren power
Warning lamp /
Siren
RESISTOR
DIODE
RELAY
VCC
GND
TRANSISTOR
External connectionAlarm cable
ALARM I/O 1
ALARM I/O 2
DC 12V/50mA
GND
<If ALARM I/O 1 is set as an output terminal>
When the warning light/siren does not exceed DC 12V/50mA
Warning lamp /
Siren power
External connection
Warning lamp / Siren
ALARM I/O 1
ALARM I/O 2
DC 12V/50mA
GND
Alarm cable
<If ALARM I/O 1 is set as an output terminal>
Bekijk gratis de handleiding van Hanwha XNV-6123R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanwha |
| Model | XNV-6123R |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 5786 MB |
