Hanwha QNV-C8013R handleiding
Handleiding
Je bekijkt pagina 14 van 43
14_ vandal dome camera
vandal dome camera
Installation (camera body)
J
`
Use a cable bushing compliant with the network cable to be connected.
-
Camera main: use a cable with the diameter of Ø5 to Ø6.5
`
You can only use a network cable with a diameter of Ø6.5 or less.
[Installing the network cable] (IP66)
1. Remove the cable bushing next to the audio/alarm cable port from the camera body.
2. Remove the protruding part of the 1-hole cable bushing that was removed from the camera body.
3. Use the cap installer to pass through the RJ45 cable.
Cap Installer
4. For waterproof protection, pull down the cable below the cable bushing as shown in the figure below.
Bekijk gratis de handleiding van Hanwha QNV-C8013R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanwha |
| Model | QNV-C8013R |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 6663 MB |
