Hansgrohe Ecostat Square 15714340 handleiding

Niet gecategoriseerd

Hansgrohe

80 pagina's

PDF beschikbaar

Handleiding

English

Assembly (see page 64)

Fault Cause Remedy

Insuﬃcient water - Supply pressure inadequate - Check water pressure (If a pump has

been installed check to see if the

pump is working).

- Regulator ﬁlter dirty - Clean ﬁlter in front of the mixer and

on the MTC-thermo cartridge

- Shower ﬁlter seal dirty

- ﬁlter insert shower dirty

- Clean ﬁlter seal between shower

and hose

- Clean ﬁlter insert between shower

and hose

Crossﬂow, hot water being forced into

cold water pipe, or vice versa, when

mixer is closed

- Backﬂow preventers dirty or leaking - Clean backﬂow preventers,

exchange if necessary

Spout temperature does not

correspond with temperature set

- Thermostat has not been adjusted - Adjust thermostat

- Hot water temperature too low - Increase hot water temperature to

42 °C to 60 °C

Temperature regulation not possible - thermo cartridge calciﬁed - Exchange thermo cartridge

- For new installations: basic body

incorrectly connected (should be:

cold right, hot left) or installed with

180° rotation

- Install function block turned through

180°

Safety stop button not operating - Spring defective

- Button calciﬁed

- Clean spring and/or button,

exchange if necessary

Instantaneous heater didn't work with

thermostat

- Filters are dirty - Clean the ﬁlter / exchange ﬁlter

- check valve hasn't moved back - Exchange check valves

- Flow limiter in handshower isn’t

removed

- Remove ﬂow limiter

Diverter stiﬀ - Diverter defective - Exchange diverter

Diverter leaking - Dirt or sedimentation on valve seat. - Clean valve seat or exchange

diverter

Special information for UK

(see page 76)

Bekijk gratis de handleiding van Hansgrohe Ecostat Square 15714340, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.