Handleiding
Je bekijkt pagina 52 van 73
Installing, connecting and start-up Page EN-15
NOTICE
Risk of damage!
Improper handling of the appliance can
result in damage.
n
Use only the side carry points to lift
the oven.
n
Do not set the oven down on the edge
or corner of the oven door! The glass
panes can be damaged.
1. Push the oven halfway into the built-in
recess.
2. Connect the oven to the hob.
3. Push the oven into the recess until the
front fascia is flush with the installation
unit.
The mains cable must not be kinked,
pinched or otherwise damaged.
4. Ensure an even gap between the oven
and the unit walls on both sides. Do not
seal the gap above the oven fascia.
A
U
T
O
1
2
3
4
5
A
U
T
O
(27)
(26)
5. When the oven is correctly aligned,
open the oven door and screw it firmly
to the built-in cabinet using the en-
closed assembly material (26), (27).
6. Switch the socket fuse back on.
Cleaning before use
In order to reliably remove grease and oil
residues from production as well as stub-
born dust deposits, which have arisen due
to storage and transport, you must perform
a pre-cleaning of the oven. This not only
helps protect your health but also ensures
delicious cakes and roasts.
1. Operate the oven with dripping pan
(23), oven rack (24) and baking tray
(22) at 250 °C for 60 minutes.
2. Allow the oven to fully cool down.
3. Clean the cooking compartment of the
oven, as well as the dripping pan, oven
rack and baking tray with a little soapy
water and then wipe everything dry.
Bekijk gratis de handleiding van Hanseatic HBCO707A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HBCO707A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8072 MB |
