Hanseatic GV HB-324 handleiding
Handleiding
Je bekijkt pagina 71 van 83
Dishwasher operation Page EN-29
If you turn off the dishwasher after
selecting and starting the start
delay, the start delay is cancelled.
Additional options
You can combine the various dishwashing
programmes with additional options. When
the additional option is selected, the LED
on the indicator lights up.
Additional options available:
“Extra dry”
– This option adds additional drying steps
to a programme to get drier dishes. This
option increases the water temperature
of the last rinse and the duration of the
drying step.
“Energy saving”
– This option ensures that the appliance
door automatically opens at the end of
the cycle to increase the drying effi-
ciency.
This option saves energy even when
washing is performed at a low temperat-
ure.
“Half load”
– This option allows you to specify which
baskets should be considered for the
washing cycle. You can select both bas-
kets, only the top basket, or only the bot-
tom basket. This option results in smal-
ler rinses with reduced consumption.
“Extra quiet”
– Choose the option "Extra quiet" for a
gentler and quieter rinsing process. This
option reduces the sound pressure level
of the rinsing process and can only be
set at the beginning of the programme.
“Extra fast”
– This option shortens the duration of a
cycle. This option can only be set at the
beginning of the programme.
If an additional option was used dur-
ing the last wash, this additional op-
tion will remain active during the
next selected programme. To deac-
tivate this additional option for the
newly selected programme, press
the corresponding button until the
LED at the indicator goes out.
If an additional option is not compat-
ible with the selected programme, 2
beeps will sound.
Energy-saving mode
You can turn off and turn on energy-saving
mode. The factory default setting already
has energy-saving mode enabled.
– To deactivate or activate the energy
saving mode, open the appliance door
and press and hold the "Delay" (4) and
"Extra dry/energy saving" (5) buttons for
approx. 3 seconds.
The display shows the last setting, "IL1"
or "IL0".
– "IL1" means that the energy saving
mode is activated.
The interior light switches off after 4
minutes after the appliance door has
been opened and the appliance
switches to standby mode after 15
minutes to save energy.
– "IL0" means that the energy saving
mode is disabled.
The interior light is switched on as
long as the appliance door is open
and the appliance is always switched
on as long as it is not switched off
with the "On/Off" button (1).
Signal tones
You can change the volume of the signal
tones.
1. Open the appliance door andpress and
hold the "Extra dry/energy saving” (5)
and "Half load" (6) buttons for approx. 3
seconds.
A long beep sounds. The display shows
the last adjusted volume "S0"-"S3".
The default setting is "S3".
"S0" means all sounds are off.
2. To decrease the volume, press the “Ex-
tra dry/Energy saving” button.
Bekijk gratis de handleiding van Hanseatic GV HB-324, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | GV HB-324 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 10090 MB |
