Hanseatic GV HB-324 handleiding
Handleiding
Je bekijkt pagina 56 van 83
Page EN-14 Set-up, connection and initial start-up
Aligning the appliance
To level the appliance, the two front ad-
justable feetand the back foot can be ad-
justed by up to 50mm.
The front adjustable feet are equipped with
slots.
You can adjust the height of the rear ad-
justable foot with the centre adjusting
screw.
1. Insert a crosshead screwdriver into one
of the slots and turn the adjustable feet
to the height required.
2. Check the alignment with a spirit level.
3. Make sure that the top edge of the ap-
pliance is up to the bottom edge of the
worktop to prevent it from tipping for-
ward when the appliance door is
opened.
4. Adjust the height of the rear adjustable
foot.
Mounting the front panel
You can mount a stainless-steel front panel
on the appliance door, or another front
panel design which matches your kitchen.
The front panel must not exceed a weight
of 9 kg.
1. Lay the supplied drilling template on the
reverse side of the front panel in such a
way that the drilling template and the
front panel are flush at the top.
2. Transfer the drill holes from the drill
template to the front panel.
3. Drill the drill holes in the indicated posi-
tions using a drill bit (Ø2mm).
(33)
(37)
4. Screw the two mounting pins (33) into
the front panel.
5. Attach the adhesive strips (37) to the
front panel.
Bekijk gratis de handleiding van Hanseatic GV HB-324, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | GV HB-324 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 10090 MB |
