Haier HWF12PXB1 handleiding
Handleiding
Je bekijkt pagina 31 van 40
NZ AU
Spinning fails.
Unsatisfactory
washing result.
Washing powder
residues are on the
laundry.
Laundry has grey
patches.
Unbalance of laundry.
ficient.
Maximum load has been exceeded.
Laundry was unevenly distributed
in the drum.
Insoluble particles of detergent can
remain as white spots on the laun-
dry.
Caused by fats such as oils, creams
or ointments.
Reduce loading.
Pretreat the laundry with a spe-
cial cleaner.
Check machine load and laun-
dry and run a spinning cycle
again.
Degree of soil does not match with
selected cycle.
Detergent quantity was not suf-
Select another programme.
Choose the detergent
according to the degree of
soil and
according to
manufacture
specifications.
Loosen the laundry.
Perform extra rinse.
Try to brush the residues from
the
laundry.
Choose another detergent.
10.3 In case of power failure
The current cycle and its setting will be saved.
When power supply is restored, operation will be re-
sumed.
In case of an emergency(such as an power failure,
and the door is locked), you can manually open the
door lock and remove your load. In order to do that,
water level needs to be lowered as described in"
Pump filter". Then pull lever (A) until door is unlocked
by a gentle click.
When the washing machine is in a safe state (water level below the window with a certain distance,
drum temperature below 55℃, drum is not spinning), can unlock the door.
If too much foam is inspected during spin cycle, motor stops and drain pump will be ac
-
tivated for 90 seconds. If that elimination of foam fails up to 3 times, cycle ends
without spinning.
Bekijk gratis de handleiding van Haier HWF12PXB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HWF12PXB1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4928 MB |
