Haier HWD150-BP14986ES8U1 handleiding
Handleiding
Je bekijkt pagina 27 van 36
EN
9-Troubleshooting
27
Problem Cause Solution
• Temperature sensor error. • Contact the After sales service.
• Heating error.
• Contact the After sales service.
• Motor error. • Contact the After sales service.
• Water level sensor error. • Contact the After sales service.
or
or
• Abnormal communication error.
• Contact the After sales service.
Problem Cause Solution
Washing machine fails
to operate.
• Programme is not yet started.
• Door is not properly closed.
• Machine has not been switched on.
• Power failure.
• Child lock is activated.
• Check programme and start it.
• Close the door properly.
• Switch the machine on.
• Check power supply.
• Deactivate child lock.
• No water.
• Inlet hose is kinked.
• Inlet hose fi lter is blocked.
• Water pressure is less than 0.03 MPa.
• Door is not properly closed.
• Water supply failure.
• Check water tap.
• Check inlet hose.
• Unblock inlet hose fi lter.
• Check water pressure.
• Close the door properly.
• Ensure the water supply.
• Height of drain hose is below 80 cm.
• Drain hose end could reach into
water.
• Make sure that drain hose is
properly installed.
• Make sure the drain hose is not
in water.
Drainage failure. • Drain hose is blocked.
• Pump fi lter is blocked.
• Drain hose end is higher than 100 cm
above fl oor level.
• Unblock drain hose.
• Clean pump fi lter.
• Make sure that drain hose is
properly installed.
Strong vibration while
spinning.
• Not all transportation bolts have
been removed.
• Appliance has no solid position.
• Machine load is not correct.
• Remove all transportation bolts
.
• Ensure solid ground and a levelled
position.
• Check load weight and balance.
Operation stops
before completing
wash cycle.
• Water or electric failure. • Check power and water supply.
Operation stops for
a period of time.
• Appliance displays error code.
• Problem due to load pattern.
• Programme performs soaking cycle.
• Consider display codes.
• Reduce or adjust load.
• Cancel programme and restart.
9.3 Troubleshooting without display code
Washing machine
will not be filled with
water.
M achine is draining
while being filled.
Bekijk gratis de handleiding van Haier HWD150-BP14986ES8U1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HWD150-BP14986ES8U1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4400 MB |
