Haier HWB100-B14858U1 handleiding
Handleiding
Je bekijkt pagina 9 van 36
2-Installation
EN
9
2.5.3 Drain hose to sink connection
The Junction must lie above the siphon.
A spigot connection is usual
closed a pad
(A). That must be removed to prevent an
disfunction (Fig. 2-8) .
Secure the drain hose with a clamp.
CAUTION!
The drain hose should not be submerged in water and should be secure
and
leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less
than 80 cm, the washing machine will conti drain while being lled (self-
siphoning).
Drain hose is not to be e
ended. If necessar contact after sales service.
2.6 Drain hose to sink connection
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled end
to the appliance (Fig.2-9 ) . Tighten the screw
2. The other end conneat to a water tap with a 3/4
thread (Fig.2-10).
2-9 2-10
2.7 Install cabinet door
WARNING!
Metal elements can damage the functionality of the control panel.
Do not use furniture doors with metal components in the control panel area.
Maintain the height of the device. Mark the door at the top edge height on the inside of the
2.7.1 Mark furniture doors
e 2-11.
2-8
Bekijk gratis de handleiding van Haier HWB100-B14858U1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HWB100-B14858U1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4745 MB |
