Handleiding
Je bekijkt pagina 35 van 482
Installation
35
WARNING!
Do not adjust the hinge lifting shaft excessively to a height which might cause the shaft
to leave its original locked position. (Adjustable height range:3 mm)
Waiting time
To the maintenance-free lubrication oil is
located in the capsule of the compressor This
oil can get through the closed pipe system
during slanting transport. Before connecting
the appliance to the power supply you have to
wait at least 2 hours so that the oil runs back
into the capsule.
Electrical connection
Before each connection check if:
► power supply, socket and fusing are appropriate to the rating plate.
► the power socket is earthed and no multi-plug or extension.
► the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see
warranty card).
Removing and installing the doors
In the event that you need to remove the appliance doors, please follow the door
removal and installation instructions below.
WARNING!
► Before any operation, deactivate the appliance and disconnect the mains plug
from the mains socket.
► The appliance is heavy. Always handle with at least two persons.
► Do not tilt the appliance more than 45 or place it horizontally on the ground.
► The door may fall over and hurt people, or get damaged during these steps, please
pay more attention when removing and installing doors.
Bekijk gratis de handleiding van Haier HSW59F18DWMM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HSW59F18DWMM |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 58981 MB |
