Handleiding
Je bekijkt pagina 34 van 482
Installation
34
Aligning the appliance
The appliance should be placed on a flat and solid
surface.
1. Tit the appliance slightly backwards (Fig.7).
2. Set the feet to the desired level. Make sure
the distance to the wall on the hinge sides is
at least 10 cm.
3. The stability can be checked by alternately
bumping on the diagonals. The slightly
swaying should be the same in both
directions. Otherwise the frame can warp
possible leaking door seals are the result. A
low tendency to the rear facilitates the
closing of the doors.
Fine tuning of the doors
If the doors are still not in one level after levelling
the doors by the feet, this mismatch can be
remedied by turning the hinge lifting shaft at the
right bottom corner of refrigerating door with a
spanner (Fig.8)
Clockwise turn lifting shaft with spanner to lower
door height (Fig.9).
Antic lock wise turn lifting shaft with spanner to
llft door height (Fig.10).
Fig.7
Fig.8
Fig.9
Fig.10
Bekijk gratis de handleiding van Haier HSW59F18DWMM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HSW59F18DWMM |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 58981 MB |
