Handleiding
Je bekijkt pagina 20 van 56
2020
GAS MAINTENANCE
For the gas category check the data label attached on the appliance.
TABLE FOR THE CHOICE OF THE INJECTORS
Cat: I 3+
G30/G31
28-30/37 mbar
BURNERS
Nominal power
[kW]
Reduced power
[kW]
Ø injector
[1/100 mm]
Auxiliary (A) 1,00 0,40 50
Semi-rapid (SR) 1,75 0,45 65
Rapid (R) 3,00 0,75 85
Double-ring compact (DCC)
4,00 1,50 100
Gas connection with rigid or exible pipe
Note: if already tted on the inlet pipe,
remove the rubber hose holder
Manifold
male
pipe tting
Inlet pipe
1/2” G cylindrical
(ISO 228-1) male
1/2” G cylindrical
(ISO 228-1) female
1/2” G cylindrical
(ISO 228-1) female
Sealing
washer (#)
Flexible pipe
(not supplied)
Rigid pipe
(not supplied)
Fig. 2.3
(#) If not already tted on the inlet pipe,
it is supplied with the appliance in a
separate kit
This gure is
indicative only.
ISO 228-1 (female)
1/2” G cylindrical
Conical
pipe
tting
ISO 7-1 (male)
1/2” G conical
IMPORTANT!
The conical pipe tting must be
used only if requested by the
applicable local regulations.
If this conical adaptor is not
supplied with the appliance it
can be purchased by contacting
the After-Sales Service.
Bekijk gratis de handleiding van Haier HGM95TC1XS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HGM95TC1XS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5089 MB |
