Handleiding
Je bekijkt pagina 31 van 80
3131
Fig. 3.2
LIGHTING THE BURNERS
To ignite the burner, the following
instructions are to be followed:
1. Press in the corresponding knob and
turn counter-clockwise (g. 3.2) to the
full ame position marked by the
symbol (g. 3.1);
hold the knob in until
the ame has
been lit.
In the case of a mains failure light the
burner with a match or lighted taper.
2. Wait for about ten seconds after the
gas burner has been lit before letting
go of the knob (valve activation delay).
3. Adjust the gas valve to the desired
position.
If the burner ame should go out for some
reason, the safety valve will automatically
stop the gas ow.
To re-light the burner, return the knob to
the closed “ ” position, wait for at least
1 minute and then repeat the lighting
procedure.
If your local gas supply makes it dicult
to light the burner with the knob set to
maximum, set the knob to minimum and
repeat the operation.
Bekijk gratis de handleiding van Haier HGM64TC1XS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HGM64TC1XS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7965 MB |
