Haier HBL7W5 001 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410/ 410

Afdrukken

Je bekijkt pagina 19 van 410

19

USE OF JUG & DOUBLE POWER BLADE

Note:

* As a safety feature, when the unit is powered on, if the jug and lid are

not properly installed, the motor can not work. If this happens, please

ensure the jug and lid is assembled on the right position, then start.

* Do not add ingredients before completing installation of “double power

blade”.

* If “double power blade” is not fully seated, you will not be able to install and

lock the lid.

1. Plug into the motor base and place on a clean, dry, smooth, level surface such

as a worktop or table. [Fig. 39]

2. Lower the jug onto the motor base. The handle should be aligned slightly to

the right and the jug should be oriented, so the lock symbols are visible on the

motor base. Rotate the jug clockwise until it clicks into place.

3. Exercising with care, grasp the top of the “double power blade” and place it

onto the drive gear inside the jug. Be noted that the blade will t loosely on

the drive gear. [Fig. 40]

4. Add ingredients to the jug. “DO NOT” add ingredients past the “MAX LIQUID”

line on the jug.

5. Place the lid on the jug. Press down on the handle until it clicks into place.

Once the lid is locked in place, press the knob to turn unit on. The available

program will display on the screen and the unit will be ready for use. [Fig. 41]

6. Refer to operation interface instruction part and wait for the unit to come to a

complete stop.

7. Remove the jug from the motor base by turning it on anti-clockwise and then

take up. [Fig. 42]

8. To pour out thick mixtures, ensure the lid is locked in place, then open the

spout cap. [Fig. 43]

9. For thick mixtures that cannot be emptied through the spout cap, remove the

lid and take out “double power blade” before pouring. To remove the lid, press

the “RELEASE” button and lift the handle. To remove the blade, be careful to

grasp the top of the blade and pull up from jug. [Fig. 44]

10. Turn the unit off. Unplug the unit when nished. Refer to the care &

maintenance section for cleaning and storage instructions.

[Fig. 41][Fig. 40]

[Fig. 43]

[Fig. 39]

[Fig. 44]

[Fig. 42]

GB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410/ 410

Bekijk gratis de handleiding van Haier HBL7W5 001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Blender