Handleiding
Je bekijkt pagina 8 van 68
Instructions for the installer
The distance between the hob and any other
unit or appliance above it (e.g. An extractor
hood) must be no less than 700 mm (Figure 4*).
When there is an accessible space between
the built-in hob and the cavity below, a dividing
wall made of insulating material should be
inserted (wood or a similar material) (Figure
3*).
When a 75 cm hob is fitted over a built in oven,
the latter must be fan cooled.
The Hob unit is fitted by attaching the Fixing
Clamps supplied, using the holes at the base
of the unit.
BUILDING IN
If the hob is fitted next to a cabinet on either
side, the distance between the hob and the
cabinet must be at least 15 cm; while the
distance between the cut out and the rear wall
must be at least 7 cm; while the distance
between the hob and the rear wall must be at
least 70 mm for frontal control hobs and 50
mm for lateral control hobs.
The hob may be installed in any worktop which
is heat resistant to a temperature of 100°C,
and has a thickness of 25-45 mm. The
dimensions of the insert to be cut out of the
worktop are in shown in Figure 2*.
Installing a domestic appliance can be a
complicated operation which if not carried
out correctly, can seriouslyaffect consumer
safety. It is for this reason that the task
should be undertaken by a professionally
qualifiedperson who will carry it out in
accordance with the technical regulations in
force. In the event that this advice isignored
and the installation is carried out by an
unqualified person, the manufacturer
declines all responsibility for any technical
failure of the product whether or not it
results in damage to goods or injury to
individuals.
how the sealant should be applied.
Metal objects in the drawer may reach high
temperatures due to air recirculation. It is
t h e r efo re r eco mm en de d to u s e a n
intermediate wood panel.
Important - The diagram in Figure 1* shows
If a hood can not be installed, an electric fan
should be fitted to an outside wall or window
to ensure that there is adequate ventilation.
SUITABLE LOCATION
When a 60 cm hob is fitted over a built in oven,
the latter must be fan cooled.
This appliance must be installed in accordance
with the regulations in force and only used in a
well ventilated space. Read the instructions
before installing or using this appliance.
The electric fan should be able to carry out a
complete change of air in the kitchen 3-5
times every hour. The installer should follow
the relevant national standards.
A gas-powered cooking appliance produces
heat and humidity in the area in which it is
installed. For this reason you should ensure
good ventilation either by keeping all natural
air passages open or by installing an extractor
hood with an exhaust flue. Intensive and
prolonged use of the appliance may require
extra ventilation, such as the opening of a
window or an increase in speed of the electric
fan, if you have one.
*See “Technical information” section at the end of this
manual.
EN 7
Bekijk gratis de handleiding van Haier HAVG75TBBP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HAVG75TBBP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7566 MB |
