Hager ESR1336029 handleiding
Handleiding
Je bekijkt pagina 281 van 308
279
Technical changes reserved
Technical
Information
General technical information
Mechanical load:
The trunking system, junction boxes and service units are manufactured to the technical requirements of DIN EN 50085 and DIN EN 60670.
Flush-mounted floor components have a load-bearing capacity of 1,500 N. Slight sagging is permissible.
Installation:
When installing underfloor trunking systems the different expansion and shrinkage behaviours of the adjoining materials (screed, floorings)
must be observed. Suitable measures must be taken to protect the underfloor trunking system against these movements (variation of vol-
ume). To prevent cracks in thin floorings (stone, tiles), it must be verified that the flooring is suitable for the application.
Safety measures, equipotential bonding:
Underfloor trunking systems, installation units and accessories made of metal and the metal parts of composite items must be included in
the safety measures in accordance with DIN VDE 0100. The connections between the components can be considered to be sufficiently con-
ductive if the connection points are either welded, soldered, riveted, bolted or if bare metallic surfaces are joined under pressure. Expansion
joints made at the building site must be connected by flexible lines to ensure equipotential bonding. The protective conductor terminal must
accommodate the required number of conductors of a rated cross-section of 1.5 to 4 mm². The protective conductor connection may be
waived for inactive metal parts such as screws, rivets, type plates if these parts are very small or located in positions where they cannot be
grasped or do not provide a large contact surface.
Soundproofing:
Soundproofing in buildings is defined in DIN 4109. The transmission of sound inside trunking systems can be restricted through the use of
suitable soundproofing materials on site. Fire safety regulations must be observed when selecting the soundproofing materials. The transmis-
sion of structure-borne sound through ceilings caused by footsteps can be reduced through the use of screed-covered trunking with sound-
proofing mats. Flush floor trunking systems from Hager are available with soundproofing mounts on request. The soundproofing mounts
reduce the transmission of structure-borne sound through the ceiling.
Fire protection:
General statements pertaining to fire safety are outlined in DIN 4102. Cable bulkheads with cable bushings must comply with the DIN specifi-
cations and must be certified. Special regulations are contained in the fire protection ordinances applicable on site.
Dimensions:
General tolerances of dimensions provided for metal parts are based on DIN 2768 part 1 (medium). General tolerances of dimensions provid-
ed for plastic parts are based on DIN 16901.
Further standards, directives and regulations:
Installation and operation of underfloor electrical installations must comply with the requirements of the following DIN standards,
VDE statuary requirements and regulations in their latest issue.
- DIN EN 60670-1 and -23 (Underfloor electrical installation - built-in units)
- DIN EN 50085-1 and -2-2 (Underfloor electrical installation - trunkings and accessories)
- DIN VDE 0100 (especially part 520)
- DIN VDE 0105
- DIN VDE 0107
- DIN VDE 0108 (see annex 1 of part 1)
- DIN VDE 0298
- DIN VDE 0800
- DIN 31000/VDE 01000
- FTZ directive 731TR1
- TAB (Technical connection conditions) of the utility provider responsible
- BGV A2 (Electrical plants and devices)
- AVB Elt. V (General conditions for power supply to tariff customers)
- VOB (Service regulations for construction services)
- Safe design of passages, floors and stairs
- Directive: Construction and equipment of schools
- Directive on fire safety, form 2013 (Vds)
Bekijk gratis de handleiding van Hager ESR1336029, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hager |
| Model | ESR1336029 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 89748 MB |
Caratteristiche Prodotto
| Kleur van het product | Groen |
| Breedte | 45 mm |
| Diepte | 40 mm |
| Duurzaamheidscertificaten | RoHS |
| Aantal | 20 |
