Hager ESR1336029 handleiding
Handleiding
Je bekijkt pagina 102 van 308
100
Technical changes reserved
tehalit.BKB
electraplan.BK Installation instructions,
Flush-floor trunking system BKFD with sealing option
Preparation
Before installing the sealing tape, open the
trunking system and clean it on the inside
and outside. The slot holding the sealing
tape must be free of dust and grease. Do not
open the trunking system before the screed
has fully hardened.
Cut off sealing tape Attach adhesive sealing tape
Cut off the required length. Peel off the backing paper over a length of
approx. 20 - 30 cm. Place the sealing tape
into the slot in the lateral profile and press it
in lightly.
Cross members
Sealing tape joints
At the joints, the sealing tape ends must join
exactly and with slight pressure. Do not cut
them at an angle and do not let them overlap.
Sealing corners
Never bend the sealing tape around a corner
without cutting it. As with the joints, join the
ends with slight pressure.
Install two sealing strips in the centre of the
cross member. Install their ends as with the
90° corner. Install sealing tape only at the
cross members supporting cover joints.
Bekijk gratis de handleiding van Hager ESR1336029, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hager |
| Model | ESR1336029 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 89748 MB |
Caratteristiche Prodotto
| Kleur van het product | Groen |
| Breedte | 45 mm |
| Diepte | 40 mm |
| Duurzaamheidscertificaten | RoHS |
| Aantal | 20 |
