Gys WF 51 handleiding
Handleiding
Je bekijkt pagina 32 van 116
32
User manual
WF 51
Translation of the original
instructions
Backup error.
You have exceeded the maximum number of
backups.
You need to delete some programs.
The number of backups is limited to 200.
Automatic deletion of JOBS.
Some of your JOBs have been deleted
because they were incompatible with the new
pre-installed user settings (synergies).
-
USB key error.
There is no JOB detected on the USB stick. -
The product’s memory space is full. Free up some space on the USB key.
File error.
The le does not match the pre-installed
user settings (synergies) downloaded to the
product.
The le was created with pre-installed user
settings (synergies) that are not present on the
machine.
UPDATE PROCEDURE
Download the latest rmware :
To download the latest software version, enter the serial number of your welding power source here:
https://update.jbdc.pro/getlastupdate
Then copy the ‘.egf’ le to the USB stick (USB stick not supplied). This le must not be located in a folder or sub-folder on the USB stick.
The USB stick must contain only one ‘.egf’ le, and must be formatted in FAT32.
Updating your product :
1. Switch o your unit using the On/O button.
2. Plug the USB stick into the USB port.
3. Press and hold the two buttons in the middle of the HMI.
4. Switch on your machine using the On/O button while holding down the two buttons in the middle of the HMI. When the screen displays one of
these messages, you can release the buttons.
System Update V__.__ Please Wait ... Versions are up-to-date USB Key Detection
Update in progress. When the update is complete,
the product indicates ‘Update completed’ and
restarts automatically after 3 seconds.
The product is already up to date, and will
restart automatically after 3 seconds.
The USB stick is not recognised.
Format your USB key in FAT32, and copy the
‘.egf’ le to the USB stick.
WARRANTY CONDITIONS
The warranty covers any defects or manufacturing faults for two years from the date of purchase (parts and labour).
The warranty does not cover:
• Any other damage caused during transport.
• The general wear and tear of parts (i.e. : cables, clamps, etc.).
• Incidents caused by misuse (incorrect power supply, dropping or dismantling).
• Environment-related faults (such as pollution, rust and dust).
In the event of a breakdown, please return the appliance to your distributor, along with:
- dated proof of purchase (receipt, invoice, etc.),
a note explaining the malfunction.
Bekijk gratis de handleiding van Gys WF 51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | WF 51 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16060 MB |
