Gys WF 51 handleiding
Handleiding
Je bekijkt pagina 23 van 116
EN
23
User manual
WF 51
Translation of the original
instructions
DESCRIPTION OF THE EQUIPMENT (II)
1- Reel support Ø 200/300 mm 10- USB connector
2- Switch for Wire inching - purging 11- Torch support
3- Wire-feed motor 12- Interconnection cable connector
4- Coolant inlet (Blue) 13- Gas inlet
5- Coolant outlet (Red) 14- Power relay connector
6- Push-Pull torch connector 15- Interconnection support
7- Euro connector (torch) 16- Transport handle
8- HMI (Human Machine Interface) 17- Turret (pivot)
9- Screen protection 18- Cover for optional owmeter kit (073395)
HUMAN-MACHINE INTERFACE (HMI)
HMI
Please read the Interface User Guide (HMI) which forms part of the complete product literature.
POWER SWITCH
This equipment has been designed to work exclusively with the power sources in the COSMOS range :
COSMOS 400 G 085589
COSMOS 500 G 085596
The connection between these two parts is made through a dedicated interconnection cable, available separately:
Type of torch cooling Length Section Reference
Air
5 m 70 mm² 075443
10 m
70 mm² 075450
95 mm² 077553
15 m 95 mm² 082083
20 m 95 mm² 082090
Liquid
1.8 m 70 mm² 075467
5 m 70 mm² 075474
10 m
70 mm² 075481
95 mm² 075504
15 m 95 mm² 079816
20 m 95 mm² 082106
ATTACHING THE INTERCONNECTION CABLES
Make sure the main welding power source switched o when connecting or disconnecting the wire feeder. Switch o the power
using the switch on the back of the device and wait two minutes.
For attaching the interconnection cable between the power source and the wire feeder, refer to pages 3 or 4.
SETTING UP THE REEL
a b
- Remove the nozzle (a) and contact tube (b) from your MIG/MAG torch.
a
b
c
- Open the wire feeder cover.
- Position the reel on its holder.
- Take into consideration the reel stands’s drive lug (c). To t a 200 mm reel, tighten the
plastic reel holder (a) to the maximum.
- Adjust the brake wheel (b) to prevent the non-moving spool from tangling the wire when
the welding stops. Do not over tighten as this will cause the power source to overheat.
Bekijk gratis de handleiding van Gys WF 51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | WF 51 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16060 MB |
