Gys flash 148.12 CNT FV handleiding
Handleiding
Je bekijkt pagina 41 van 72
41
GYSFLASH 108.12 / 148.12 / 158.12 CNT FV
EN
41
Err28: COM_NOK
Multi-charger mode:
Gysash communication failure
No communication, check SHM assembly and SLAVE X device
conguration.
To revert back to running a single Gysash, select OFF for the
Multi-charger function.
Err29 : Time_Out_2 Maximum runtime limit exceeded
Disconnect the Gysash output, or press the SART/STOP button
to clear the error.
Err30 : No Bat No battery at the Gysash output Check that the Gysash is correctly connected to the battery
Err31 : COM_NOK
Multi-charger mode :
Gysash connected to the wrong SHM
channel
Check that the Gysash Master is indeed on SHM channel no. 1
and the Gysash Slaves on the other channels.
To switch back to single-charger operation, press the START/
STOP button, enter the administrator code and select OFF for
the Multi-charger function.
FIRMWARE UPDATE (.EGF)
Update Procedure using USB key:
1. First of all, make sure that the «.egf» le matching the new rmware is on the USB stick. This le must not be located in a
folder or subfolder of the USB stick.
Warning: The USB stick must contain only one «.egf» le and must be formatted in FAT32.
2. Switch the Gysash o using the On/O switch
1
3. Connect the USB stick to the Gysash
4. Hold down the SELECT button
5. Switch on the Gysash using the On/O switch
1
while holding down the SELECT button until the update starts.
During the update, «System Update V__.__» appears on the screen.
6. When the update is complete, the Gysash displays «Update completed», and automatically restarts after 3 seconds.
WARRANTY
The warranty covers all defects or manufacturing faults for a period of two years starting from the date of purchase (parts and
labour).
The warranty does not cover:
• Any other damage caused during transport.
• The general wear and tear of parts (i.e. : cables, clamps, etc.).
• Incidents caused by misuse (incorrect power supply, dropping or dismantling).
• Environment-related faults (such as pollution, rust and dust).
In the event of a breakdown, please return the item to your distributor, along with:
- a dated proof of purchase (receipt or invoice etc.).
- a note explaining the malfunction.
Bekijk gratis de handleiding van Gys flash 148.12 CNT FV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | flash 148.12 CNT FV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9530 MB |
