Gys flash 148.12 CNT FV handleiding
Handleiding
Je bekijkt pagina 34 van 72
34
GYSFLASH 108.12 / 148.12 / 158.12 CNT FV
EN
34
Supply Supply
selection
Supply 0
Supply mode list
Supply 1
...
Status
Stop - standby
Supply inactive with Autodetect OFF and Manual Start
OFF (no start possible)
Stop - start enable
Supply inactive with Autodetect OFF and Manual Start ON
Stop - detect ready
Supply inactive with Autodetect ON and Manual Start OFF
Stop - detect + start
Supply inactive with Autodetect ON and Manual Start ON
Stop - contact
Supply inactive with contact detected
Run - NOK
Supply in progress with NOK output voltage
Run - OK
Supply in progress with output voltage OK
Power up
Stop - standby
Power up inactive with Autodetect OFF and Manual
Start OFF (no start possible)
Stop - start enable
Supply inactive with Autodetect OFF and Manual Start ON
Run
Power-up in progress
Error
Device
Device error
User
Operating error
For Charge mode, the output is activated only if the group in use corresponds to a checked group (Group
selection) and the charger status corresponds to one of the checked statuses (Status).
For Supply mode, the output is activated only if the mode in use corresponds to a checked Supply mode
(Supply selection) and the charger status corresponds to one of the checked statuses (Status).
If none of the boxes is checked, the output never activates. Conversely, if all boxes are checked, the output
is activated as soon as the charger is switched on.
Information
Information
GYSFLASH 158.12
HW 08.01- HMI 03.01
SW 01.00
22.11.069909.000000
This menu displays information about your Gysash:
- Device name
- Hardware/software versions
- Serial number
Keyboard/Scanner
Keyboard Scanner Menu
Type
QWERTY
Identificaion
This menu lets you congure the type of keyboard or scanner connected to the loader (QWER-
TY, AZERTY, QWERTZ). It also gives you the option of enabling or disabling the identication
function, which uses the keypad and/or barcode scanner to associate specic information with
each charge, such as the customer’s name, the vehicle model, the VIN number, the battery
number and so on. This menu only appears if a barcode reader is connected to the charger.
To scan barcodes (or QR code instructions), it is advisable to deactivate the
identication function.
Bekijk gratis de handleiding van Gys flash 148.12 CNT FV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | flash 148.12 CNT FV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9530 MB |
