Gys flash 148.12 CNT FV handleiding
Handleiding
Je bekijkt pagina 29 van 72
29
GYSFLASH 108.12 / 148.12 / 158.12 CNT FV
EN
29
Automatic calibration (recommended)
Cable calibration
To calibrate, simply short-circuit the charging clamps and then conrm.
The device then automatically calculates the cable resistance.
Be sure that the metal portions of the jaws to which the cables are attached are in proper
contact with each other.
OK NOT OK NOT OK
Manual calibration (not recommended)
Cable calibration
11.5 m
The cable resistance can be set manually.
Warning: this value must include the internal resistance of the Gysash.
Advanced settings
This menu gives you access to the advanced features of your Gysash. A Master password is required for access.
Master password
Main mode
Mode
Charge
Auto - select
Supply
Power - up
Recall last mode
This menu is used to set the main operating mode of the Gysash. This is the
mode that the device reverts to when it is switched on, at the end of a period of
operation (battery disconnection, manual shutdown, fault reset, etc.), or when
the Conguration menu is closed.
If «Recall last mode» is selected, the unit will always restart in the last mode
used.
Bekijk gratis de handleiding van Gys flash 148.12 CNT FV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | flash 148.12 CNT FV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9530 MB |
