Gys flash 108.12 CNT FV handleiding
Handleiding
Je bekijkt pagina 23 van 72
23
GYSFLASH 108.12 / 148.12 / 158.12 CNT FV
EN
23
Connection / disconnection :
• Disconnect the power supply before plugging or unplugging the
connections to/from the battery.
• Always ensure the Red clamp is connected to the «+» battery
terminal rst. If it is necessary to connect the black clamp to the
vehicle chassis, make sure it is a safe distance from the battery and
the fuel line. The charger must be connected to the mains.
• After charging, disconnect the charger from the mains, then
disconnect the negative clamp from the car body and then
disconnect the positive clamp from the battery, in this order.
Connection :
• The charger must be connected to an earthed power supply.
• This hardware is compliant with the IEC 61000-3-12, provided that
the short-circuit power Ssc is greater than or equal to 2147242 at
the interface point between the user’s power supply and the public
power supply network. It is the responsibility of the installer or user
of the equipment to ensure, if necessary by consulting the operator
of the public power supply network, that the equipment is solely
connected to a power supply with a Ssc short-circuit power greater
than or equal to 2147242.
Maintenance :
• If the power supply cable is damaged, the replacement cable must
be obtained from the manufacturer or its service team.
• Maintenance should only be carried out by a qualied person.
• Warning ! Always disconnect from the mains before performing
maintenance on the device.
• If the internal fuse is melted, it must be replaced by the manufacturer
(GYS dedicated sales service) or by an equally qualied person to
prevent any accidents.
• Do not use solvents or any agressive cleaning products.
• Clean the device’s surfaces with a soft, dry cloth.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British Dec-
laration of Conformity is available on our website (see home page).
• Equipment in conformity with Moroccan standards.
• The declaration Cم (CMIM) of conformity is available on our
website (see cover page).
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a household bin.
Bekijk gratis de handleiding van Gys flash 108.12 CNT FV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | flash 108.12 CNT FV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9530 MB |
