GW Instek PSW30-72 handleiding
Handleiding
Je bekijkt pagina 25 van 133
GETTING STARTED
25
may remain charged on the filter capacitors for
some time and be potentially hazardous.
In addition, bleed resistors also allow for
smoother voltage regulation of the power
supply as the bleed resistor acts as a minimum
voltage load.
The bleed resistance can be turned on or off
using the configuration settings.
Note
By default the bleed resistance is on. For battery
charging applications, be sure to turn the bleed
resistance off as the bleed resistor can discharge
the connected battery when the unit is off.
Internal Resistance
Description
On the PSW, the internal resistance of the
power supply can be user-defined in software.
(Internal Resistance Setting, page 78). When the
internal resistance is set it can be seen as a
resistance in series with the positive output
terminal. This allows the power supply to
simulate power sources that have internal
resistances such as lead acid batteries.
Internal
Resistance Range
Unit Model
Internal Resistance Range
PSW 30-36
0.000 ~ 0.833Ω
PSW 30-72
0.000 ~ 0.417Ω
PSW 30-108
0.000 ~ 0.278Ω
PSW 80-13.5
0.000 ~ 5.926Ω
PSW 80-27
0.000 ~ 2.963Ω
PSW 80-40.5
0.000 ~ 1.975Ω
Bekijk gratis de handleiding van GW Instek PSW30-72, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | PSW30-72 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11631 MB |
