GW Instek GPE-1323 handleiding
Handleiding
Je bekijkt pagina 20 van 51
GPE-1323/GPE-1205 User Manual
20
Reverse
Current:
Regenerative
load
When the power supply is connected to a
regenerative load such as a transformer or inverter,
reverse current will feed back to the power supply.
The GPE-1000 power supply cannot absorb reverse
current. For loads that create reverse current, connect
a resistor in parallel to the power supply to bypass
the reverse current. This description only applies
when the bleed resistance is off.
Note
The current output will decrease by the amount of
current absorbed by the resistor. Ensure the resistor
used can withstand the power capacity of the power
supply/load.
Reverse
Current:
Accumulative
energy.
When the power supply is connected to a load such as
a battery, reverse current may flow back to the power
supply if the bleed resistance is on. To prevent
damage to the power supply under this condition,
use a reverse-current-protection diode in series
between the power supply and load. If the bleed
resistor is turned off or set to auto, there is no need to
add a diode.
Bekijk gratis de handleiding van GW Instek GPE-1323, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPE-1323 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4219 MB |
