GW Instek GPE-1205 handleiding
Handleiding
Je bekijkt pagina 37 van 51
Operation
37
Series Operation
Series
Configuration
Before using the power supplies in series, the master
and slave units need to be configured.
1. Configure the OVP and OCP
settings for the master unit.
2. Master and slave power supply
tracking Set series power supply
master (S/M), slave (S/S)
Unit
Tracking Setting
Master Unit with 1 slave:
S/Master
Slave Unit:
S/Slave
3. If using voltage remote sensing,
set the 2-4W/Lock key to enable
the 4-wire function
4. Cycle the power on the units
(reset the power).
Note
Return the master machine to local (independent)
mode and the slave machine to local (independent)
operation
When entering parallel mode, the status of the slave
machine will change to match that of the master
machine, and the slave machine will be locked
Only the master computer displays V Settings, A
Settings, OVP, and OCP Settings
Each power supply OTP works independently
Master-Slave
Operation
Only operate the power supplies in series if the units
are configured correctly.
Bekijk gratis de handleiding van GW Instek GPE-1205, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPE-1205 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4219 MB |
