Handleiding
Je bekijkt pagina 48 van 51
WWW.GVISION-USA.COM
GVISION USA, INC. 30398 Esperanza, Rancho Santa Margarita, CA 92688 / Phone. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.com
48
(12) MUTIPLE SOURCE:
Send a set command of the Input Source to several monitors at once.
Format : 0xFn(Start : n = Send Bytes) + 0x88 + 0x00(Set ID: All) + 0xFE + 0xE7(Param) + 0xXX(Target SetID) + 0xXX(Input
Source)
START: Total Sending Bytes. Ex) 0xFF + 0x01 =Send16Bytes
SET ID: must be 0x00(All)
INPUT SOURCE: Refer to (1)
Ex) Target Set ID: 0x01, INPUT SOURCE: 11(DVI)
Target Set ID: 0x02, INPUT SOURCE: 12(HDMI)
Target Set ID: 0x03, INPUT SOURCE: 11(DVI)
Target Set ID: 0x04, INPUT SOURCE: 10(PC)
0xFC(Start 12 Byte) + 0x88(Set) + 0x00(All: Fixed) + 0xFE + 0xE7(Param)
+ 0x01(Target SetID:) + 0x0B(INPUT SOURCE: 11 DVI)
+ 0x02(Target SetID) + 0x0C(INPUT SOURCE: 12 HDMI)
+ 0x03(Target SetID) + 0x0B(INPUT SOURCE: 12 HDMI)
+ 0x04(Target SetID) + 0x0A(INPUT SOURCE: 10 PC)
(13) MULTPLE REMOTE KEY:
Send a set command of the Remote Key Code to several monitors at once.
Format : 0xFn(Start : n = Send Bytes) + 0x88 + 0x00(Set ID: All) + 0xFE + 0xE8(Param) + 0xXX(Target SetID) + 0xXX(Remote
key)
START: Total Sending Bytes. Ex) 0xFF + 0x03 =Send 18Bytes
SET ID: must be 0x00(All)
REMOTE KEY: Refer to Virtual remote item.
Ex) Target Set ID: 0x01, Remote Key: 0x43(MENU Key)
Target Set ID: 0x02, Remote Key: 0x43(MENU Key)
0xF8(Start 8 Byte) + 0x88(Set) + 0x00(All: Fixed) + 0xFE + 0xE8(Param)
+ 0x01(Target SetID:) + 0x43(Remote key: Menu)
+ 0x02(Target SetID) + 0x43(Remote key: Menu)
(16) MULTPLE PARAM
Send a set command of the Parameter to several monitors at once.
Format : 0xFn(Start : n = Send Bytes) + 0x88 + 0x00(Set ID) + 0xFE + 0xE9(Param) + 0xXX(Target SetID) + 0xXX(Param) +
0xXX(Value)
START: Total Sending Bytes. Ex) 0xFF + 0x00 =Send 15Bytes
SET ID: must be 0x00(All)
PARAM: Refer to 3.2 System parameter
Ex) Target Set ID: 0x01, PARAM: 0x05(Brightness), Value:0x32(50)
Target Set ID: 0x02, PARAM: 0x05(Brightness), Value:0x32(50)
Target Set ID: 0x03, PARAM: 0x05(Brightness), Value:0x32(50)
Target Set ID: 0x04, PARAM: 0x05(Brightness), Value:0x32(50)
0xFF(Start) + 0x01(16 Byte) + 0x88(Set) + 0x00(All: Fixed) + 0xFE + 0xE9(Param)
+ 0x01(Target SetID:) + 0x05(Pram: Brightness) + 0x32(Value: 50)
+ 0x02(Target SetID) + 0x05(Pram: Brightness) + 0x32(Value: 50)
+ 0x03(Target SetID) + 0x05(Pram: Brightness) + 0x32(Value: 50)
+ 0x04(Target SetID) + 0x05(Pram: Brightness) + 0x32(Value: 50)
Bekijk gratis de handleiding van GVision VW49CD-OD-40003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GVision |
| Model | VW49CD-OD-40003 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 12228 MB |
