Grunkel MaxEase Steam PL-3200MAXTOP handleiding

Niet gecategoriseerd

Grunkel

73 pagina's

PDF beschikbaar

Handleiding

Set the steam regulator to the "OFF" position. Then set the temperature regulator knob to

the appropriate position according to the ironing indications of the garments.

CAUTION: You must wait for the appliance to cool down completely before relling

the water tank.

Water spraying

You can use the water spray function at any temperature setting, in steam or dry ironing, as

long as there is water in the tank.

Press the water spray button to spray the garments with water during ironing.

Steam planing

Set the temperature control knob to the "- - - -" or "MAX" position.

When the iron has reached the optimum ironing temperature, the indicator light will go

out. Then adjust the temperature control knob according to the indications on the label of

the garment to be ironed.

Set the steam control knob to the desired position.

CAUTION: During ironing, the appliance heats up and emits steam at high tempera-

ture..

Use extreme caution when directing the steam ow towards the garments to avoid acci-

dental damage. Avoid direct contact with hot parts.

Steam blow

You can use the steam jet function to remove wrinkles and deep creases. Set the tempera-

ture control knob to the "- - - -" or "MAX" position.

When the iron has reached the optimum ironing temperature, the indicator light will go

out. Then adjust the temperature regulator knob according to the indications on the label

of the garment to be ironed.

Set the steam regulator to the OFF position Press the steam stroke button repeatedly, with

5-second pause intervals between each press.

Self-cleaning

It is recommended to perform the self-cleaning process approximately every two weeks,

following the steps described below:

Bekijk gratis de handleiding van Grunkel MaxEase Steam PL-3200MAXTOP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.