Grunkel I-DancerTurboLaser handleiding
Handleiding
Je bekijkt pagina 31 van 60
EN
26
Installation
NOTE: If the battery is fully discharged and the robot does not turn on, it is necessary
to place the robot in the charging station. The robot will turn on automatically.
Connect the adapter to the charg-
ing base. Coil the cable section
that does not need to be extended.
Place the charging base against a
wall. Avoid moving the charging
base or exposing it to sunlight.
Sunlight may interfere with the
charging signal.
Be sure to maintain sucient
clearance on both sides of the
charging base (at least 0.5 meters)
and 1.5 meters in front of the base.
Press and hold the power button
to turn on the robot. Wait for the
indicator light to stay on. Then
place the robot in front of the
charging station. The device will
emit a voice message to indicate
that the battery charging has
started..
Bekijk gratis de handleiding van Grunkel I-DancerTurboLaser, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grunkel |
| Model | I-DancerTurboLaser |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6138 MB |
