Grunkel I-DancerEasy handleiding
Handleiding
Je bekijkt pagina 32 van 64
EN
29
Fast operation
1. Installation of the charging base
Connect the power adapter to the charging base. Place the charging base against the wall.
The space around the charging station must be kept clear to allow the robot to move
around. Also, no reective objects should be placed near the base. Connect the adapter to a
suitable power outlet.
NOTE: When the charging base is connected to the adapter the indicator light stays on.
2. Switch on the robot
Press the automatic function button for two seconds to turn the robot on. To turn it o,
press and hold the button for three seconds.
Do not turn o the robot when the cleaning is
nished. Recharge the battery completely for the
next cleaning. If the robot remains paused for
more than ten minutes it will enter sleep mode.
For the robot to exit sleep mode and enter standby
mode it is necessary to press the automatic func-
tion button once..
3. Load the robot
Place the robot on the charging base. While the
robot is charging, the auto function button ashes
orange. When charging is complete, the button
will illuminate green, then the button will turn o
and the robot will go into standby mode. The light
will then turn o and the robot will go into standby
mode. Charge the robot for 6 hours before rst
use.
Bekijk gratis de handleiding van Grunkel I-DancerEasy, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grunkel |
| Model | I-DancerEasy |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7254 MB |
