Grundig GW7P510447W handleiding
Handleiding
Je bekijkt pagina 30 van 56
EN / 30
Temperature Adjustment button
only works backwards. For ex-
ample, if you want to select 60°C
while 40°C is written on the display,
you need to press the button sev-
eral times until you reach 60°C, go-
ing backwards from 40°C.
If you go to Cold Wash option and
press Temperature Adjustment but-
ton again, the recommended max-
imum temperature for the selected
programme will be displayed. Press
the Temperature Adjustment but-
ton again to decrease the temperat-
ure.
Finally, the Cold light that indicates cold
washing illuminates on the display.
You can also change the temperature after
the washing starts. You can also change
the desired temperature after the washing
programme starts. However, you need to
do this before the heating phase starts.
6.7 Spin Speed Selection
Whenever a new programme is selected,
the recommended spin speed of the selec-
ted programme is displayed on the Spin
Speed indicator. It is possible that the re-
commended spin speed value is not the
maximum spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, "Rinse Hold " and "No Spin
" options appear on the display.
Spin Speed Adjustment button only
works backwards. For example, if
you want to select 1000 rpm while
800 rpm (cycle/min) is written on
the display, you need to press the
button several times until you reach
1000 rpm, going backwards from
800 rpm.
If you are not going to unload your laundry
immediately after the programme com-
pletes, you can use Rinse Hold function in
order to prevent your laundry from getting
wrinkled when there is no water in the ma-
chine.
This function holds the laundry in the final
rinsing water. If you want to spin your
laundry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start/Pause button. The pro-
gramme will resume. Machine drains
the water and spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.
You can change the spin speed after the
washing starts if the washing steps allow it.
Changes cannot be made if the steps do
not allow it.
Auxiliary function selection for drying:
When you select a new washing program,
press the Auxiliary Function Selection but-
ton to set the drying option suitable for this
program.
Bekijk gratis de handleiding van Grundig GW7P510447W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grundig |
| Model | GW7P510447W |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4749 MB |
