Handleiding
Je bekijkt pagina 47 van 121
47
ENGLISH
USB RECORDING ------------------------------------------------------
“Pausing” time shift and
continuous recording
programmes
You can pause any programme you are
watching. For instance, if the phone rings when
you are watching a movie, you can pause
the movie and resume it after the call without
missing anything.
The last scene that was frozen is displayed and
time shift is recorded into the external data
media.
With the continuous recording feature, TV
records the channel you are currently watching
as much as the time shift memory you create
on external data media. Thus, you can use the
rewind feature on the channel you are watching.
Note:
7
Use an external USB Disk driver for an
uninterrupted “Permanent Time Shift”.
1 Press »
w
« during the broadcast.
– Television picture is paused and delay
time is displayed.
2 To resume the broadcast, press »
w
«.
– The system continues recording the
broadcast while you are watching it.
Note:
7
The following functions can be used in the
time shift mode.
–
Fast rewind, press »
u
« several times for
the desired speed;
–
Fast forward, press »
v
« several times for
the desired speed;
–
To pause, press »
w
«.
3 To stop time shift, press and hold »
«.
Recording Programmes
You can record a TV channel. Programmes are
recorded onto the external data media and the
archive is managed via television.
A memory of 44 MB up to 110 MB is required
for a 1 minute record.
1 Select the channel with »1…0« or »
« to start recording.
2 Press »
« on remote control.
– Recording information shall be displayed:
Recording symbol, channel name,
programme time and recording time.
– This information will disappear after a
short while, the »REC« symbol and the
recording time appear in the lower left
corner of the screen.
3 Press »
« to stop recording.
Notes:
7
When recording is complete, it will
automatically be stored on the external
data media.
7
If you remove the external data media
during recording, then the recording is
cancelled automatically and no data is
recorded onto the external data media.
Switching the TV to stand-by during
recording
1 Select the channel with »1…0« or »
« to start recording.
2 Press »
« on remote control.
3 To switch the TV to stand-by, press »
8«.
Bekijk gratis de handleiding van Grundig 65GGU8960, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grundig |
| Model | 65GGU8960 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 13070 MB |
