Growatt SPH 4000-10000TL3 BH-UP Handleiding (88 Pagina's)

Handleiding

The recommended wiring diagrams are as follows:

This diagram is an example for the on-grid system without special requirement on the

electrical connection. The N line must be connected.

Note:

This diagram is an example for cable connection in Australia and New Zealand, where a

switch cannot be installed on the N line. The N line must be connected.

Step 3: Push and rotate the threaded sleeve onto the connection terminal until both are

locked tightly. Then tighten the locking nut.

C

l

i

c

k

!

Step 4: Push the AC connector into the AC Grid port

Figure 5.19

C

l

i

c

k

!

The inverter side

Figure 5.20

Step 5: To remove the AC connector, insert the screwdriver and press the release-

mechanism to pull the connector out.

The inverter side

Figure 5.21

Figure 5.22

Figure 5.23

SPH Inverter

AC GRID

EPS Load

EPS OUTPUT

Diagram A

SPH Inverter

AC GRID

EPS Load

EPS OUTPUT

Diagram B

24

23

Bekijk gratis de handleiding van Growatt SPH 4000-10000TL3 BH-UP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.