Growatt SPE 6000-12000 US handleiding
Handleiding
Je bekijkt pagina 4 van 33
1 Information on this Manual
1.1 Validity
This manual is valid for the following devices:
Ø SPE 12000 US, SPE 10000 US, SPE 8000 US, SPE 6000 US
1.2 Scope
This manual describes the assembly, installation, operation and troubleshooting
of this unit. Please read this manual carefully before installations and operations.
1.4 Safety Instructions
This chapter contains important safety and operating
instructions. Read and keep this manual for future reference.
1. Before using the unit, read all instructions and cautionary
marking on the unit, the batteries and all appropriate sections
of this manual. The company has the right not to quality
assurance, if not according to the instructions of this manual
for installation and cause equipment damage.
2. All the operation and connection please professional
electrical or mechanical engineer.
3. All the electrical installation must comply with the local
electrical safety standards.
4. When install PV modules in the daytime, installer should cover
the PV modules by opaque materials, otherwise it will be
dangerous as high terminal voltage of modules in the
sunshine.
5. CAUTION-To reduce risk of injury, charge only deep-cycle
lead-acid type rechargeable batteries and lithium batteries.
Other types of batteries may burst, causing personal injury
and damage.
6. Please be clear which kind of battery system you want, lithium
battery system or lead-acid battery system, if you choose the
wrong system, energy storage system can’t work normally.
WARNING
1.3 Target Group
This document is intended for qualified persons and end users. Tasks that do not
require any particular qualification can also be performed by end users. Qualified
persons must have the following skills:
Ø Knowledge of how an inverter works and is operated.
Ø Training in how to deal with the dangers and risks associated with installing
Ø and using electrical devices and installations.
Ø Training in the installation and commissioning of electrical devices and
Installations.
Ø Knowledge of the applicable standards and directives.
Ø Knowledge of and compliance with this document and all safety information.
7. NEVER charge a frozen battery.
8. Be very cautious when working with metal tools on or around
batteries. A potential risk exists to drop a tool to spark or
short circuit batteries or other electrical parts and could
cause an explosion.
9. For optimum operation of this inverter, please follow required
spec to select appropriate cable size. It’s very important to
correctly operate this inverter.
10. Please strictly follow installation procedure when you want
to disconnect AC or DC terminals. Please refer to
INSTALLATION section of this manual for the details.
11. GROUNDING INSTRUCTIONS -This inverter should be
connected to a permanent grounded wiring system. Be sure
to comply with local requirements and regulation to install
this inverter.
12. NEVER cause AC output and DC input short circuited. Do NOT
connect to the mains when DC input short circuits.
13. Make sure the inverter is completely assembled, before the
operation.
14. Do not disassemble the unit. Take it to a qualified service
center when service or repair is required. Incorrect re-
assembly may result in a risk of electric shock or fire.
15. To reduce risk of electric shock, disconnect all wirings before
attempting any maintenance or cleaning. Turning off the
unit will not reduce this risk.
16. This is a class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
21
Bekijk gratis de handleiding van Growatt SPE 6000-12000 US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | SPE 6000-12000 US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6565 MB |
