Growatt MOD 3-10KTL3-XA handleiding
Handleiding
Je bekijkt pagina 23 van 28
Warning
message
Description
Suggest
Warning 608
Off-grid box
abnormal alarm
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Warning 700
The off-grid box fan
is faulty
1.Check the fan wiring after powering it down.
2.If error message still exists,contact manufacturer.
Warning 701
The generator
started abnormally
1.Check the generator and wiring after shutdown.
2.If error message still exists,contact manufacturer.
13.2.2 System error
Error code
Description
Suggest
Error 200
AFCI Fault
1.After shutdown,Check the panel terminal.
2.Restart inverter.
3.If error message still exists,contact manufacturer.
Error 201
Leakage current
too high.
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 202
The DC input
voltage is
exceeding the
maximum
tolerable value.
1.Immediately disconnect the DC switch and check the
voltage.
2.If the fault code still exists after the normal voltage is
restored, contact manufacturer.
Error 203
PV isolation Low
1.After shutdown, check whether the panel shell is
reliably grounded.
2.If error message still exists,contact manufacturer.
Error 300
AC V Outrange
1.Check grid voltage.
2.If the error message still exists despite the grid voltage
being within the tolerable range, contact
manufacturer.
Error 301
AC terminals
reversed
1.Check AC terminals.
2.If error message still exists,contact manufacturer.
Error 302
No AC
Connection
1.After shutdown,Check AC wiring.
2.If error message still exists,contact manufacturer.
Error 303
NE abnormal
1.Check PE,to ensure that the PE line contact good.
2.If error message still exisits,contact Manufacturer.
Error 304
AC F Outrange
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 305
Over Load Fault
1.Check whether output load over range; If load too
large, please reduce load.
2.If error message still exists, contact manufacturer.
Error code
Description
Suggest
Error 306
CT LN Reversed
1.After shutdown，Check the SP-CT connection.
2.If error message still exists,contact manufacturer.
Error 307
Communication
fault,M3 didn't
receive SP-CT data
1.Check communication wire.
2.If error message still exists,contact manufacturer.
Error 308
Communication
fault;Pairing time
too long
1.Restart pairing.
2.If error message still exists,contact manufacturer.
Error 400
DCI bias abnormal
1.Restart inverter.
2.If error message still exists, contact manufacturer.
Error 401
DCVoltage High
Fault
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 402
Output DC
current too high
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 403
Output current
unbalance
1.After shutdown,Check the output current is not
balanced.
2.If the error message still exists, contact manufacturer.
Error 404
bus sample fault
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 405
Relay fault
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 406
Init model fault
1.Reset mode.
2.If error message still exists,contact manufacturer.
Error 407
AutoTest failure
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 408
NTC Temperature
too high
1.After shutdown,Check the temperature, normal
restart the inverter.
2.If the error message still exists, contact manufacturer.
Error 409
Bus voltage
abnormal
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Error 410
Communication
board and control
panel sampling
battery voltage is
inconsistent
1.Restart inverter.
2.If error message still exists, contact manufacturer.
Error 411
Communication
fault
1.After shutdown,Check communication board wiring.
2.If the error message still exists, contact manufacturer.
Error 412
Temperature
sensor connection
is abnormal
1.After shutdown,Check the temperature sampling
module is connected properly.
2.If the error message still exists, contact manufacturer.
40
39
Bekijk gratis de handleiding van Growatt MOD 3-10KTL3-XA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MOD 3-10KTL3-XA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5306 MB |
