Growatt MOD 3-10KTL3-XA handleiding
Handleiding
Je bekijkt pagina 21 van 28
13 Troubleshooting
13.1 Error message
13.2 System error
When a malfunction occurs, an error message will be displayed on the OLED screen and
the LED indicator red will light up. Faults include system faults and inverter faults.
In some cases, you may be advised to contact Growatt, please provide the following
information.
Information about the inverter:：
●Serial number
●Model
●Error message on OLED
●A short description of the problem
●Grid voltage
●DC input voltage
●Can you reproduce the failure? If so, how?
●Has this problem occurred in the past?
●What were the environmental conditions when the problem occurred?
Information about photovoltaic panels:
●PV panel manufacturer's name and model
●Panel output power
●Voc of the panel
●Vmp of the panel
●Imp of the panel
●The number of panels in each string
●If you need to replace the device, please ship it to the original box.
13.2.1 Warning Code
Warning
message
Description
Suggest
Warning 200
String fault
1.After shutdown,Check the panel is normal.
2.If error message still exists, contact manufacturer.
Warning 201
String PID quick
connect terminal
detection error
1.After shutdown,Check the string terminal wiring.
2.If the error message still exists, contact the
manufacturer.
Warning 202
DC SPD function
abnormal
1.After shutdown,Check the DC SPD.
2.If error message still exists,contact manufacturer.
Warning 203
PV Circuit short
1.Check the PV1 or PV2 wiring is short-circuited.
2.If error message still exists,contact manufacturer.
Warning 204
Dry contact
function abnormal
1.After shutdown,Check the dry Dry contact wiring.
2.If the error message still exists, contact
manufacturer.
Warning 205
PV Boost driver
broken
1.Restart inverter.
2.If error message still exists,contact manufacturer.
Warning 206
AC SPD function
abnormal
1.After shutdown,Check the AC SPD.
2.If error message still exists,contact manufacturer.
Warning
message
Description
Suggest
Warning 207
U disk over-current
protection
1.Unplug the U disk.
2.Re-access U disk after shutdown.
3.If the error message still exists, contact
manufacturer.
Warning 208
DC Fuse Open
1.After shutdown,Check fuse.
2.If error message still exists, contact
manufacturer.
Warning 209
The DC input voltage
is exceeding the
maximum tolerable
value.
1.Immediately disconnect the DC switch and
check the voltage.
2.If the fault code still exists after the normal
voltage is restored, contact manufacturer.
Warning 210
PV Reversed
1.Check PV input terminals.
2.If error message still exists,contact
manufacturer.
Warning 300
No Utility
1.Please confirm grid is lost or not.
2.If error message still exists,contact
manufacturer.
Warning 301
Grid voltage outrange
1.Check the AC voltage is in the range of
standard voltage in specification.
2.If error message still exists,contact
manufacturer.
Warning 302
Grid frequency
outrange
1.Check the frequency is in the range
of specification or not.
2.If error message still exists,contact
manufacturer.
Warning 303
EPS mode, over load
1.Please reduce the load of EPS output.
2.If error message still exists,contact
manufacturer.
Warning 304
CT Open or Wrong
1.Check if AC current sensor is connected well.
2.If error message still exists,contact
manufacturer.
Warning 305
CT line reversed or
Ground fail
1.Check the L line and N line of SP-CT is reversed
or not.
2.If error message still exists,contact
manufacturer.
Warning 306
Communication
fault,M3 didn't
receive SP-CT data
1.Check communication wire.
2.If error message still exists,contact
manufacturer.
Warning 307
Communication fault
1.Check communication wire.
2.If error message still exists,contact
manufacturer.
Warning 400
Fan function
abnormal
1.After shutdown,Check the fan connection.
2.replace the fan.
3.If the error message still exists, contact
manufacturer.
36
35
Bekijk gratis de handleiding van Growatt MOD 3-10KTL3-XA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MOD 3-10KTL3-XA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5306 MB |
