Growatt MID 30-40KTL3-X-AU handleiding
Handleiding
Je bekijkt pagina 27 van 35
47
48
Error code
Description
Suggest
Error 413
Drive exception
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 414
Memory
exception
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 415
Abnormal
auxiliary power
supply
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 416
Overcurrent
protection
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 417
The grid voltage
sampling is
inconsistent
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 418
The firmware
version of the
control board
and the
communication
board do not
match
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 419
Inconsistent
leakage current
sampling
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 420
Leakage current
module is
abnormal
1. Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 421
CPLD abnormal
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 422
Redundant
sampling is
inconsistent
1.Restart the machine;
2.If the fault information still exists,contact the
manufacturer.
Error 423
Abnormal
battery reverse
connection
protection tube
1.Restart the machine;
2.If the fault information still exists,ontact the
manufacturer.
Error 424
Battery voltage
sampling is
inconsistent
1.Restart the machine;
2.If the fault information still exists,ontact the
manufacturer.
Error 425
AFCI self-check
error
1.Restart the machine;
2.If the fault information still exists,ontact the
manufacturer.
Manufacturer warranty 15
Please refer to the warranty card.
Decommissioning 16
16.1 Dismantling the Inverter
16.2 Packing the Inverter
1. Disconnect the inverter as described in section8.
2. Remove all connection cables from the inverter.
3. Screw off all projecting cable glands.
4. Lift the inverter off the bracket and unscrew the bracket screws.
CAUTION
Danger of burn injuries due to hot enclosure parts!
Wait 20 minutes before disassembling until the housing has cooled
down.
If possible, always pack the inverter in its original carton and secure it with tension
belts. If it is no longer available, you can also use an equivalent carton. The box must
be capable of being closed completely and made to support both the weight and the
size of the inverter.
16.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between -
25°C and +60°C.
16.4 Disposing of the Inverter
Do not dispose of faulty inverters or accessories together with household
waste. Please accordance with the disposal regulations for electronic
waste which apply at the installation site at that time. Ensure that the old
unit and, where applicable, any accessories are disposed of in a proper
manner
Bekijk gratis de handleiding van Growatt MID 30-40KTL3-X-AU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 30-40KTL3-X-AU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6081 MB |
