Growatt MID 10-30KTL3-XH handleiding
Handleiding
Je bekijkt pagina 54 van 55
Error code
Description
Troubleshooting
Battery
Error 411(7)
parallel
communication
Multiple Masters
failure
2. If the fault message still exists, contact the
manufacturer.
communication cables between PM and INV,
then restart the machine.
1. Power off the machine and check the
Battery
Error 416(1)
overvoltage/
Transient
overcurrent
1. Power off the machine and check the power
cables, then restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Error 416(2)
overcurrent
Transient
1. Power off the machine and check the power
cables, then restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Error 416(4)
BM to PM
overcurrent
1. Power off the machine and check the power
cables, then restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Error 417(0)
Mismatched
MODEL
of software/
hardware
Please contact Growatt support.
Battery
Error 419(5)
software version
Inconsistent
hardware/
Please contact Growatt support.
Battery
Error 500(3)
CAN parallel
connection failed
1. Power off the machine and check the
communication cables between PM and PM,
then restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Error 505(0)
calibration failed
PM to INV voltage
2. If the fault message still exists, contact the
manufacturer.
machine.
1.Power off the machine and check the power
cables between PM and INV, then restart the
Battery
Error
506(1)
PM circuit breaker
open-circuited
1. Power off the machine and check the
insulation breaker, then restart the machine.
2. If the error message persists, please contact
Growatt support.
Error code
Description
Troubleshooting
Battery
Error 506(2)
circuited
PM fuse open
Please contact Growatt support.
Battery
Error 506(3)
cables reversed)
PM to INV short
circuited (power
machine.
1.Power off the machine and check the power
cables between PM and INV, then restart the
2.If the fault message persists, contact the
manufacturer.
Battery
Error 508(3)
Transient
overvoltage
1. Power off the machine and check the power
cables, then restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Error 603(0)
PM to INV voltage
soft start failed
1.Power off the machine and check the power
machine.
cables between PM and INV, then restart the
2.If the fault message persists, contact the
manufacturer.
Battery
Error 700(0)
Temperature
sensor
open-circuited
1.When the temperature of the machine is
close to - 40°C (-40°F), it will raise this alarm.
2.If the temperature is higher than -40°C(-
40°F) when this alarm is reported, please
contact Growatt support.
Battery
Error 707(0)
Overload fault
2.If the problem persists, please contact
Growatt support.
1.Reduce the load power, then restart the
machine.
Battery
Error 707(2)
Overload fault
1.Reduce the load power, then restart the
machine.
2.If the problem persists, please contact
Growatt support.
9695
Bekijk gratis de handleiding van Growatt MID 10-30KTL3-XH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 10-30KTL3-XH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11746 MB |
