Growatt MID 10-30KTL3-XH handleiding
Handleiding
Je bekijkt pagina 50 van 55
12.1.2 Battery alarm
Error code
Description
Troubleshooting
Battery
Warning
404(0)
Abnormal
EEPROM
Please contact Growatt support.
410(0)
Battery
Warning
abnormal
External
oscillation
1. Restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Warning
410(1)
abnormal
Oscillation
1. Restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Warning
410(2)
abnormal
USB
communication
2. If the fault message still exists, contact the
manufacturer.
1. Restart the machine, and replace the USB
flash drive.
Battery
Warning
411(6)
Parallel
communication
failed
1. Power off the machine and check the
communication cables between PM and PM, then
restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Warning
417(2)
BM and PM
software version
mismatched
1. BM and PM will automatically update to the
matched software version (takes about 30
2. If the fault message still exists, contact the
manufacturer.
minutes).
Battery
Warning
431(0)
BOOT abnormal
1. Restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Warning
500(0)
Abnormal CAN
communication
operation
during parallel
1. Power off the machine and check the
restart the machine.
2. If the fault message still exists, contact the
manufacturer.
communication cables between PM and PM, then
500(7)
Battery
Warning
BM went offline
1. Power off the machine and check the
communication cables between BM and BM, then
restart the machine.
2. If the fault message still exists, contact the
manufacturer.
8887
Error code
Description
Troubleshooting
Battery
Warning
500(9)
with PM
Abnormal
communication
restart the machine.
2. If the fault message still exists, contact the
manufacturer.
communication cables between BM and BM, then
1. Power off the machine and check the
Battery
Warning
701(0)
Battery not
discharging
alarm
cutoff SOC. Therefore, the battery is not allowed
The battery SOC reaches the preset discharge
to discharge.
Battery
Warning
702(0)
Forced charge is
required
The battery SOC is lower than the preset
discharge cutoff SOC. Therefore, forced charge
is required.
Battery
Warning
703(0)
Battery is fully
charged
The battery SOC reaches the preset charge
cutoff SOC. Therefore, the battery is not allowed
to be charged.
704(0)
Battery
Warning
overvoltage
PM to INV
1. Power off the machine and check the power
machine.
2. If the fault message still exists, contact the
manufacturer.
cables between PM and INV, then restart the
705(0)
Battery
Warning
PM to INV
overvoltage
1. Power off the machine and check the power
cables between PM and INV, then restart the
2. If the fault message still exists, contact the
manufacturer.
machine.
Battery
Warning
707(0)
Discharge
Overload
Alarm
1. Reduce the load power, then restart the
machine.
2. If the fault message still exists, contact the
manufacturer.
Battery
Warning
708(0)
Discharge
Overload
Anomaly
1. Reduce the load power, then restart the
machine.
2. If the fault message still exists, contact the
manufacturer.
Bekijk gratis de handleiding van Growatt MID 10-30KTL3-XH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 10-30KTL3-XH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11746 MB |
