Growatt MID 10-30KTL3-XH handleiding
Handleiding
Je bekijkt pagina 41 van 55
9.1 Powering off the system
9 System maintenance
To ensure the long-term and reliable operation of the system, it is recommended to
perform maintenance on a regular basis as instructed in this section.
Ÿ If the inverter is connected to a DC/DC high-voltage controller and
the off-grid mode is enabled, disconnect the AC circuit breaker
between the inverter and the grid, the inverter will output 230/240V
voltage in the off-grid mode. Before maintaining the system,
ensure that the DC SWITCH on the DC/DC high voltage controller
is set to OFF.
Ÿ After the system is powered off, there may still be residual
electricity and heat in the inverter, which could lead to electric
shock or burns. Wait 5 minutes after turning off the system and
wear protective gloves before performing any operations on the
inverter.
DANGER
Step 1. Turn off the AC breaker between the inverter and the grid.
Step 4. If the inverter is connected to a battery, set the DC SWITCH on the battery to
OFF.
Step 3. If there is a DC breaker between the inverter and the PV string, disconnect the
DC breaker.
Step 2. Set the DC SWITCH on the inverter to OFF.
Follow these steps to power off the system:
9.2 Checking items and Maintenance frequency
Checking item
Checking content
Interval
Cleaning
Ÿ Check if the heat sink and the fan are
obstructed or blocked by dust
periodically.
Once a year
Operation status
Ÿ Check if the inverter's exterior is
damaged or deformed.
Ÿ Check for any abnormal sounds during
operation.
Every six months
Ÿ Check the operating status of the
system on the APP.
Regularly
Cable connection
Ÿ Examine cables for any damage.
Ÿ Check for melting at terminal
connections
Ÿ Check if any cable is in poor contact or
loose connection.
Every six months
Grounding
Ÿ Verify if the grounding cable is securely
connected.
Every six months
Sealing
Ÿ Inspect the sealing of all terminals and
interfaces.
Every six months
Environment
Ÿ Inspect and clear any weeds around the
inverter before they wither.
Once a year
Decommissioning 10
10.1 Removing the inverter
10.2 Packing the inverter
10.3 Storing the inverter
Ÿ Take away the mounting bracket.
Ÿ Disconnect all electrical connections from the inverter, including the RS485
communication cable, DC input cables, AC output cables, battery cables, and the
grounding cable.
Ÿ Remove the inverter from the mounting bracket.
Ÿ If the original package is available, please place the inverter in the original box and
tie it with tapes.
Ÿ If the original package is not available, please put the inverter in a carton box that is
suitable for its dimensions and weight.
Store the inverter in a dry place and keep the temperature between -25℃ and 60℃.
10.4 Disposing of the inverter
Do not dispose of the product together with the household waste but
in accordance with the disposal regulations for electronic waste
applicable at the installation site.
7069
Bekijk gratis de handleiding van Growatt MID 10-30KTL3-XH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 10-30KTL3-XH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11746 MB |
