Growatt MAX 70KTL3 handleiding
Handleiding
Je bekijkt pagina 12 van 35
Inverter Model
MAX 50KTL3 LV
25-35
35
10.9
MAX 60KTL3 LV
25-35
35
10.9
MAX 70KTL3 LV
35-50
50
12.8
MAX 80KTL3 LV
35-50
50
12.8
MAX 60KTL3 MV
25-35
35
10.9
MAX 70KTL3 MV
25-35
35
10.9
MAX 80KTL3 MV
35-50
50
12.8
MAX 90KTL3 MV
35-50
50
12.8
MAX 100KTL3 MV
35-50
50
12.8
Notice: The cable must be unbroken.
AC side connection steps:
•If the cable is thick, after tightening the cable do not shake it and ensure
the cable is well-connected and then start the inverter. Loose connection
may cause overheat.
•
leakage.
Must tighten the waterproof cover, otherwise there will be a risk of water
1>Following drawing shows inverter's AC terminal, L1, L2, L3 are three live lines, N is
Neutral line.
Notice: The screw is M8 screw.
inner ground
connection
AC terminal block
Fig 6.1
2>Firstly, unscrew the waterproof cover, then put the cable through the cover, pile the
cable base on terminal size(17mm recommended), use a wire stripper to connect
cable. and terminal, tighten all the terminal screws.
Fig 6.2
Diagram of how to install a terminal:
Fig 6.3
3>Put the water proof cover back to the inverter and fill the cover with fireproof mud,
just as following drawing.
Fig 6.4
Tighten waterproof cover
17
18
Cross-sectional
area(mm²)
Recommendation
(mm²)
Cable outer
diameter(mm)
Cable specification:
WARNING
WARNING
Bekijk gratis de handleiding van Growatt MAX 70KTL3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MAX 70KTL3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10147 MB |
