Growatt HOPE 5.5L-A1 handleiding
Handleiding
Je bekijkt pagina 18 van 34
15
4.4.3 Single battery installation
Make sure the battery is in off mode and the battery breaker is off Ensure there are no tangled
cables after battery wiring.
Operation Step 1: Fix the ground wire to the ground terminal with an M4 screw, and fix the other
end to the inverter. Note that the cross-sectional area of the ground wire is 16mm
2
1. Insert the network cable A into the inverter port of battery 1, and the other end insert into the
BMS network port of the inverter
Operation Step 2: Insert the network cable into the battery port
1. Insert network cable A into the inverter port of the battery, and the other end of the network cable
into the network port of the inverter
Operation Step 3: Connect power cable。
1. Fix the OT terminal of the power cable to the pair of "+/-" terminals of the battery
2. Put the plastic cover back
3. Fix the other end to the breaker and then connect to the inverter
Bekijk gratis de handleiding van Growatt HOPE 5.5L-A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | HOPE 5.5L-A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5057 MB |
