Handleiding
Je bekijkt pagina 13 van 33
8
button (Not applicable)
button
button
no display
(stops at
Press this button can select left & right swing angle.
Fan blow angle can be selected circularly as below:
current position)
can't be adjusted under auto mode)
When setting TIMER ON, TIMER OFF or CLOCK,
press "▲" or "▼" button to adjust time. (Refer to
CLOCK, TIMER ON, TIMER OFF buttons).
Press "▲" or "▼" button once increase or
decrease set temperature 1℃(°F). Holding "▲" or "▼"
button, 2s later, set temperature on remote con-
troller
wil
l change quickly. On releasing button
after setting is finished, temperature indicator on
indoor unit will change accordingly. (Temperature
no display
(horizontal louvers
stops at current position)
Press this button can select up & down swing
angle. Fan blow angle can be selected circularly as
below:
●
●
●
●
●
●
●
button
ambient temperature.
When I FEEL function is turned on, the remote con-
troller should be put within the area where indoor
unit can receive the signal sent by the remote
controller
When selecting " ", air conditioner is blowing
fan automatically. Horizontal louver will automat-
ically swing up & down at maximum angle.
When selecting
、 、
" ",
、 、
air condition-
er is blowing fan at fixed position. Horizontal
louver will stop at the fixed position.
When selecting "
、
、
", air conditioner is
blowing fan at fixed angle. Horizontal louver will
send air at the fixed angle.
Hold " "button above 2s to set your required
swing angle. When reaching your required
angle, release the button.
Press this button to start I FEEL function and " "
will be displayed on the
remote controller. After
this function is set, the remote controller will send
the detected ambient temperature to the controller
and the unit will automatically adjust the indoor
temperature according to the detected tempera-
ture. Press this button again to close I FEEL func-
tion and " " will disappear.
Please put the remote controller near user when
this function is set. Do not put the remote control-
ler near the object of high temperatu
re or low tem-
perature in order to avoid detecting inaccurate
“
、
、
" may not be available. When air condi-
tioner receives this signal, the air conditioner will blow
fan automatically.
Press this button continuously for more than 2s, the
main unit will swing back and forth from up to down,
and then loosen the button, the unit present position
of guide louver will be kept immediately.
Under up and down swing mode, when the status is
switched from off to , if press this button again 2s
later, status will switch to off status directly; if
press this button again within 2s, the change of swing
st
atus will also depend on the circulation sequence
stated above.
●
●
Press this button continuously for more than 2s, the
main unit will swing back and forth from left to right,
and then loosen the button, the unit will stop swinging
and present position of guide louver will be kept
immediately.
Under left and right swing mode, when the status is
switched from off to , if press this button again 2s
later, status will switch to off status directly; if
press this button again within 2s, the change of swing
status will
also depend on the circulation sequence
stated above.
●
●
The function is only available for some models.
NOTE
●
NOTE
●
button
Press this button to turn off display light on indoor
unit. " " icon on remote controller disappears.
Press this button again to turn on display light.
" " icon is displayed.
button (Not applicable)
button
no display
(stops at
Press this button can select left & right swing angle.
Fan blow angle can be selected circularly as below:
current position)
can't be adjusted under auto mode)
When setting TIMER ON, TIMER OFF or CLOCK,
press "▲" or "▼" button to adjust time. (Refer to
CLOCK, TIMER ON, TIMER OFF buttons).
Pre ss "▲" or " ▼" b u t t o n o n c e inc rea s e or
decrease set temperature 1℃(°F). Holding "▲" or "▼"
button, 2s later, set temperature on remote con-
troller
wil
l change quickly. On releasing button
after setting is finished, temperature indicator on
indoor unit will change accordingly. (Temperature
Press this button continuously for more than 2s, the
main unit will swing back and forth from left to right,
and then loosen the button, the unit will stop swinging
and present position of guide louver will be kept
immediately.
Under left and right swing mode, when the status is
switched from off to , if press this button again 2s
later, status will switch to off status directly; if
press this button again within 2s, the change of swing
status will also depend on the circulation sequence
stated above.
●
●
The function is only available for some models.
NOTE
●
Bekijk gratis de handleiding van Gree GSC24UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GSC24UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5018 MB |
