Handleiding
Je bekijkt pagina 12 van 33
●
This is a general use remote controller. It could be
used for the air conditioner with multifunction. For the
functions which the model doesn't have, if press the
corresponding button on the remote controller, the
unit will keep the original running status.
After putting through the power, the air conditioner
will give out a sound. Power ind icator " " is ON.
After that, you can operate the air conditioner by
using remote controller.
Under on status, pressing the button on the remote
controller, the signal icon " " on
the display of
remote controller will blink once and the air condition-
er will give out a
"di" sound, which means the signal
has been sent to the air conditioner.
For preventing cold air, after starting up heat mode,
indoor unit will delay 1~5 minutes to blow air (Actual
delay time depends on indoor ambient temperature).
Set temperature range from remote controlle r:
16~30℃(61-86℉).
Cooling only unit won't receive heat mode signal. If
setting heat mode with remote cont rolle r, press
" " button can't start up the unit.
●
●
AUTO COOL DRY FAN
(Not applicable)
●
When selecting auto mode, air conditioner will
operate automatically according to the sensed
temperature. Set temperature can't be adjusted
and will not be displayed as well. Press "FAN"
button can adjust fan speed. Press " " / " "
button can adjust fan blowing angle.
After selecting cool mode, air conditioner will
operate under cool mode. Press "▲" or "▼"
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
button to adjust fan blowing angle.
When selecting dry mode, the air conditioner
operates at low speed under dry mode. Under
dry mode, fan speed can't be adjusted.
Press " " / " " button to adjust fan blowing
angle.
When selecting fan mode, the air conditioner will
only blow fan, no cooling and no heating. Press
"FAN" button to adjust fan speed. Press " " /
●
●
●
7
Introduction for buttons on
remote controller
" " button to adjust fan blowing angle.
When selecting heat mode, the air conditioner
operates under heat mode. Press "▲" or "▼"
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
button to adjust fan blowing angle. Heat mode is
not applicable for this model.
NOTE
●
●
●
button
Pressing this button can set fan speed circularly
as: auto(AUTO), low( ), medium( ) ,
high( ).
Auto
button
Press this button to turn on the unit. Press this button
again to turn off the unit.
button
Press this button to select your required operation
mode.
button
Under cool or heat mode, press this button to turn
If start this function, the unit will run at super-high
fan speed to cool or heat quickly so that the ambi-
ent temperature approaches the preset tempera-
ture as soon as possible.
NOTE
●
HEAT
to quick cool or quick heat mode. " " icon is
displayed on remote controller. Press this button
again to exit turbo function and " " icon will
disappear.
NOTE
Under AUTO speed, air conditioner will select proper
fan speed automatically according to ex-factory setting.
Fan speed under dry mode is low speed.
●
●
Auto
Bekijk gratis de handleiding van Gree GSC24UZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GSC24UZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5018 MB |
