GRE RBR60 handleiding
Handleiding
Je bekijkt pagina 7 van 88
PROBLEM POSSIBLE CAUSES SOLUTION
The robot can’t charge.
Battery damage.
Please contact the dealer to
replace the battery. Warning!
Don’t turn on the robot and
replace the battery yourself. This
can cause serious or fatal injury, so
the warranty will not be valid.
The charging cable is not fully
connected to the external adapter
and the robot.
Make sure the charger cable
is properly and completely
connected to the external adapter
and robot. Please refer to the user
manual.
The external adapter is broken.
Contact the dealer for
replacement. Warning! Using the
wrong external adapter will result
in damage to the robot / battery
and void the warranty.
The robot can still work without
water.
The water of the robot is not dry,
and the contact is short circuited,
so the robot can still work without
water.
Leave it outside the water for a few
seconds and wait for the water to
dry
There is garbage at the contact
point, such as wet hair, which
causes short circuit of the contact.
Remove hair and other rubbish
with tools
Circuit board damaged
Please contact the dealer for
replacement.
If the charger shows red light
all the time, it cannot change to
green light more than 8h.
Battery damage.
Please contact the dealer to
replace the battery. Warning!
Don’t turn on the robot and
replace the battery yourself. This
can cause serious or fatal injury, so
the warranty will
not be valid.
If the charger change to green
light in a very short time, and the
device also
only work for a short time (within
half an hour, need multiple
validation).
Bekijk gratis de handleiding van GRE RBR60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GRE |
| Model | RBR60 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 10944 MB |
