Graupner mz-16 HoTT handleiding
Handleiding
Je bekijkt pagina 32 van 48
Page 32 of 48 S1047.mz-16-V1.0-EN
Assigning Digital Switches on RX
You can also assign a digital output switches over the Telemetry
connecƟon directly in the receiver.
To avoid malfuncƟoning when assigning digital switches, only the aīected
receiver may be in operaƟon during their switch assignment.
1. Bind to the desired receiver and, if needed, switch oī any other
receivers
2. Switch to the “Seƫng & Data View” submenu of the telemetry menu.
3. Use the right selecƟon key to switch to the “RX FAIL SAVE” page. 4.
In the “OUTPUT CH” line, if necessary, select the receiver output to
be switched as described under “FuncƟon of the cross-shaped
keypad”.
In the Įgure on the leŌ, this is, for example, the receiver connecƟon
10 of the receiver.
4. Change to the “INPUT CH” line.
5. Tap the middle ENTER key to acƟvate the value Įeld.
The value ĮĞůd is displayed inverted:
6. Select the desired digital switch.
In the picture on the leŌ this is for example “D01”.
7. Tap the middle ENTER key to complete the process.
The value ĮĞůd is not inverted anymore.
8. Eventually use the same procedure with the assignment of other
switches.
Bekijk gratis de handleiding van Graupner mz-16 HoTT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Graupner |
| Model | mz-16 HoTT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10998 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 1070 g |
| Breedte | 195 mm |
| Diepte | 210 mm |
