GPX PJ504 handleiding
Handleiding
Je bekijkt pagina 21 van 44
21
External Audio
Requires a 3.5mm to RCA audio/video cable (not included).
Note: Speakers must have their own power supply.
1. Press and hold the Power button on the projector to enter Standby mode.
2. Using a 3.5mm to RCA stereo cable, connect the external powered speakers to the Headphone Jack on the
projector. Note: The yellow video plug will not be needed in this setup and will not need to be connected.
3. Press the Power button to turn on the projector. The projector will automatically detect the connection and
send audio signal to the speakers.
Headphone Jack
Connect AV cable to speaker:
Audio Left Channel - White
Audio Right Channel - Red
Video (Yellow) plug will
NOT be needed in this instance.
Connecting to Other Devices
Pairing to Bluetooth Wireless Speakers or Sound Bar
NOTE: Bluetooth is OFF by default when the projector first powers ON. Bluetooth can be turned ON or OFF from
the Bluetooth Device Menu.
1. Enable Bluetooth on the receiver (external speakers, sound bar, etc.) to which you wish to connect. Devices such
as smartphones, tablets, or computers are not Bluetooth receivers and will not connect to the projector. To eliminate
confusion, you should disable Bluetooth on all receivers to which you do not wish to connect.
2. Power on the projector. Press the Menu button on the remote. Use the Arrows and OK buttons on the remote to
highlight and select the Bluetooth Device menu.
3. In the Bluetooth Device menu, use the Arrows and OK buttons on the remote to change the Bluetooth setting
to ON.
4. Use the Arrow buttons to select Search Bluetooth and press OK to start searching for available devices.
5. Use the Arrow buttons to highlight your desired Bluetooth speaker or soundbar and press OK to select.
6. When successfully paired, the Bluetooth receiver should indicate it is connected, usually with a chime or other
audible noise. Check the user manual on your Bluetooth receiver for more information.
7. When successfully connected, the projector will display the Bluetooth receiver's name on the Home Screen, and
sound played from the projector will be heard through the Bluetooth receiver.
After initial pairing, the projector and the Bluetooth speakers will stay paired unless unpaired manually by the user or
erased due to a reset of either device. If this occurs or you find either unit is unable to connect, repeat the above steps.
To disconnect Bluetooth, enter the Bluetooth Device menu and change the Bluetooth setting to OFF.
Bekijk gratis de handleiding van GPX PJ504, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GPX |
| Model | PJ504 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4208 MB |